Radial tires

Compared with bias tires (bias tire), a smaller tread deformation. Thus, having a better grip when turning. Due to the higher tread stiffness, the tire is easier to transmit road shocks, which resulted in a bit of bad driving comfort.

B: Ban bias
Compared with radial tires, these tires provide a softer ride, but not terlau membeloknya good performance.

REFERENCE:
• The types and privileges tires

Types and privileges tires
A. Tires with inner tubes (Tubed tire)
Having a tube that inflates with air.
B.Ban tubeless
It has a special rubber coating called "layer in" and not tube
C.Ban simple profile (low-profile tire)
"Profiles" is related to the contour of the tire, and a tire "low-profile" has a low cross section with a maximum aspect ratio of 60% *.
Side walls are low, and the transformation of a small footprint when cornering, thus increasing the power curve.
*: Aspect ratio = H / W x 100%
D. Run-flat tire
This tire side walls containing reinforcement of rubber, so even though the vehicle is equipped with these tires, it will leak when driving, and the air pressure dropped to zero, and the vehicle can still continue the journey of about 100 km (62 miles) again with a maximum speed of 60 km / h (37 miles / hour).
E. Compact spare tire (Compact spare tire (tire type T))
Ban temporary use in an emergency, such as normal tires can not be used because of a leak.
This tire is narrower bias tire air pressure is high.

1. Tube
2. Valve
3. The inner layer (Inner liner)
4. Side rubber reinforcement


Size, performance, and tire construction are shown on the sidewall (sidewall) tires.
The diagram on the left shows the name of the size of various areas on the tires.
H: High tire
W: Width of tires
D1: Diameter of rim
D2: outer diameter tires
REFERENCE:
• How to read tire sizes




How to read a tire size
1. Radial-ply tire
2. System size tire ISO (International Standardization Organization)
3. Bias-ply tire
4. Compact space tire (tire type T)